Page 56 - Building Regulation Design Guidelines - Architecture Book (Blue Code)

SEcTION: 6 BUILDING/DEVELOPMENT CONTROL FACTORS SEcTION: 6 BUILDING/DEVELOPMENT CONTROL FACTORS

6.3.3 In this case, if the ground floor is entirely for commercial use, this 6.3.7 The minimum setback for industrial types (within one
setback for the ground floor must be at least 3.0 meters from the development) between two main buildings shall be 3.0 meters.
rear and sideline of the adjacent buildings, if adjacent activities are ( figure-12)
non-commercial type until instructed differently elsewhere.
Plot Limit Adjacent Plot Plot Limit
6.3.4 No construction works shall be permitted in the setback area for all
building types, except for power transformers, pergolas, uncovered
parking areas and the projected elements, in accordance with S ≥ 5.5 m
section - 10 and related business unit DCR.
6.3.5 In Free Zone Districts the minimum setback for industrial type shall
be 5.5 meters from all plot limits.
For other business units and developments, the setback shall be as S ≥ 5.5 m
per the DCR of the related business unit. S ≥ 5.5 m
Main Building
6.3.6 The minimum setback (within one development) between two
main buildings to be equal to set back between the two buildings
and adjacent plots with exception to industrial buildings.
(figure -11) Adjacent Plot ≥ 3.0 m Adjacent Plot

Plot limit Adjacent Plot Plot limit

S
Main Building

S S
Main Building Substation
Adjacent Plot S Adjacent Plot S ≥ 5.5 m S1 ≥ 3.0 m Annex

S S Plot Limit Road Plot Limit
Main Building
Figure-12 Building Setback (S) in Industrial Districts

S
6.3.8 The minimum setback (within one development) between the main
Plot limit Road Plot limit building and any annex shall be 3.0 meters.

S = Setback as per the DCR of related Business Unit
Figure-11 Setback (S) for All Building Types except Industrial
54 55