Page 87 - Building Regulation Design Guidelines - Architecture Book (Blue Code)

SEcTION:10 EXTERNAL BUILDING ELEMENTS AND PROJECTIONS SEcTION:10 EXTERNAL BUILDING ELEMENTS AND PROJECTIONS

10.2 cANOPIES 10.3 TERRAcES

10.2.1 A canopy is an aesthetic, non-functional projection to make 10.3.1 Terraces are non-projected platforms or roofs, covered or
life more agreeable for city inhabitants and visitors. Large uncovered, protected by a railing balustrade or parapet, and
transparent canopies have played an increasing role in the are being supported by below floor structure of the building.
architectural concepts of modern town planning. In addition, (figure-29)
transparent canopies protect shoppers against weather on the
commercial streets and in pedestrian zones.

10.2.2 Canopies are not permitted beyond the plot limits unless it is
higher than 6m from road level, and shall be under the approval
by the Authority and Business Unit DCR. (figure -27)
≥1.1 m Terrace Upper Floor
It is permitted to construct canopies beyond the plot limits
according to the following:
a) A canopy of maximum 0.5 meter projection, if the road width
is 6.0 to 10.0 meters.

b) A canopy of maximum 0.3 meter projection, if the road width
Setback as per
or alley is below 6.0 meters.
DCR of Related
Business Unit
c) A canopy of maximum 0.9 meter projection, for the roof and ≥ 3.0 m
parapet.
Lower Floor
10.2.3 Canopies of maximum 0.3 meter projection are permitted within
the set backs of residential villas, at the window sill or lintel Plot Limit
level.

Figure-29 Terraces

10.3.2 Plots with step slopes or with stepped design are highly suitable
for the construction of buildings with stepped terrace. Where
large terraces above 3.2 meters depth, privacy shall be improved
by using an overhang or progressively setback in every floor.
However, the key factor can be the width of the terrace wall,
which can be calculated using the equation on (figure -30).

86 87