Page 263 - Dubai Universal Design Code
P. 263

Annex 3 - Required accessibility in each


                                    building type


                 Legend


                 UA          Universally Accessible


                 UA*         When the building is built in a floodable zone the entrances of the
                             building can have a change in level from the exterior floor level. In this
                             exceptional case the entrances solutions may be permitted.

                 UA/P        Only for small new and existing buildings: paths can be smaller
                             respecting the Tolerance Limits and is permitted interaction space only in
                             one side in the toilet.
                             Only for retrofitting existing buildings: The building facility shall be
                             Universally Accessible; however, if the Universal Accessibility level is
                             technically or economically impossible exceptions can be accepted
                             respecting the Tolerance Limits.

                 C           Convertible. Presents dimensions that allow transform the house or
                             apartment to reach at least the Permissible level in a future at a low cost.

                 UA/PM       The facility shall follow the Paralympics Committee requirements as long
                             as these requirements are greater than the Dubai Universal Accessibility
                             Code requirements. If not the facility shall be Universally Accessible.


                 TA/FT       Tactile maps are required and accessible toilets outside toilets blocks are
                             not accepted as family toilets.

                 FT/F        Additional to the Universal Accessible toilets a Family toilet and a feeding
                             room are requested.

                 All*        All industrial buildings and laboratories areas except:

                             - The ones that handle oil and gas, refinery industry, chemicals, toxic
                             materials and potential explosive compounds.
                             - Areas with activities that require a “gowning regime”.

                             - Production areas with heavy machinery.
                             - Areas for warehousing and storage.






                                                                                                          262
   258   259   260   261   262   263   264   265   266   267   268