Page 142 - Building Regulation Design Guidelines - Architecture Book (Blue Code)

SEcTION: 15 OFF STREET PARKING REQUIREMENTS SEcTION: 15 OFF STREET PARKING REQUIREMENTS

The minimum total length for parallel buses parking, shall be 15.2.17 Cycles Stands: The minimum dimensions for cycle stand
with the transition lengths as following: depending on the parking angle and shall be as below table-6
 For one bus parking stall is 44.0 meters and (figure-65). Regarding cycle path minimum dimensions refer
to section-20.
 For two buses parking stall is 56.0 meters
 For three buses parking stall is 68.0 meters (D) Distance (Y) Inclined
(X) Inclined Stand between Two Stand Depth
Total Length (L) Angle Width (meter) Stands (meter) (meter)
≥ 16.0 m ≥ 12.0 m ≥ 16.0 m
25 1.60 0.84 0.80
Transition Length
Driveway 45 1.45 0.60 1.45
Curb Line One Way Driveway ≥ 4.5 m
≥ 4.0 m 90 - 0.64 1.90
≥ 9.5 m
Lay-by Straight Table-6 Cycles Stands Minimum Dimensions
Curb Line
≥ 1.8 m Recommended Walkway Width
Figure-63 Bus Parallel Parking
≥ 0.6 m
b) In case of Angled Parking:
The minimum parking lot dimensions 4.0 x 12.0 meters, and
for 90 degree, the minimum drive way width absolute 16.0 ≥ 0.6 m
meters and preferred 18.0 meters (figure -64) for other angles (L)
minimum drive way width depending on the parking angle
and to be as per international standards.
≥ 0.3 m Y
Wall / Fence
≥ 1.0 m
Wall / Fence
≥ 12.0 m

≥ 16.0 m ≥ D X
preferred ≥ 2.0 m
18.0 m
Figure-65 Cycles Stands

15.2.18 Marine/Harbor Boat, yacht and Ferry: For construction guidance
≥ 12.0 m
and requirements of all types of marinas / harbors (pleasure
boats, small yacht, cabin cruiser, etc) refer to Authority related
Code.
Figure-64 (90°) Buses Angled Parking

140 141